58
58
Button
Description
Automatic Overview
This feature switches the map view to Overview mode when the next
route event is at a distance. Overview is a zoomed out 2D view to let
you see the surrounding area. You have the following controls for
Automatic Overview:
x
Turn Distance for Overview: The map view will be switched to
Overview mode if the next route event is at least as far as this
value.
x
Default Zoom Level: Overview mode will appear with this zoom
level. You can scale the map in Overview mode but next time
Overview appears again, this zoom level will be applied.
4.5.3 Route Planning options
These settings determine how routes will be calculated. Tap the following buttons:
,
,
.
Button
Description
Road Types Used for Route
Planning
To let the route fit your needs, you can also set which road types are
to be considered for or to be excluded from the route, if possible.
Excluding a road type is a preference. It does not necessarily mean
total prohibition. If your destination can only be accessed using some
of the excluded road types, they will be used, but only as much as
necessary. In this case a warning icon will be shown on the Route
Information screen, and the part of the route not matching your
preference will be displayed in a different colour on the map.
Route Calculation Method
You can choose from different route types. The routing method can
also be chosen while creating the route: when the destination is
selected, tap
in the Cursor menu.
Use Traffic Information
(available only if your
hardware supports TMC)
When TMC messages are received, this setting tells ZENEC
Navigation Software whether to use that information in route planning.
Recalculate to Avoid Traffic
(available only if your
hardware supports TMC)
This setting determines how ZENEC Navigation Software uses the
received TMC information in route recalculation:
x
Automatic: When route recalculation becomes necessary based
on the received TMC events, ZENEC Navigation Software
recalculates the route automatically.
x
Manual: When route recalculation becomes necessary based
on the received TMC events, ZENEC Navigation Software
notifies you, but you can decide whether to recalculate the
route or not.
x
Disabled: TMC events are only taken account when the route is
recalculated in an off-route situation.
