32
32
3.1.4 Selecting the destination from the POIs
You can select your destination from the POIs included with ZENEC Navigation Software or from the
ones you have previously created.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
.
2. Select the area around which the POI should be searched for:
x
: The POI will be searched for around a given address.
x
: The map appears with the Cursor in the middle. Modify the location of the Cursor
if necessary, then tap
. The POI will be searched for around the given
location.
x
: The POI will be searched for around the current GPS position.
x
: The POI will be searched for around the destination of the active route.
x
: The POI will be searched for not around a given point, but by the size of
the detour it adds to the active route. This can be useful if you search for a later
stopover that causes only a minimal detour, for example upcoming petrol stations or
restaurants.
3. You can narrow the search with the following:
x
Select the POI group (e.g. Accommodation), and after that, if needed, select the POI
subgroup (e.g. Hotel or Motel).
x
To find the POI by its name, tap
, and use the keyboard to enter a part of the
name.
x
To list all POIs in a given POI group, tap
.
4. [optional] When finally the list of results appear, you can sort the list:
x
: sort the list alphabetically (available when you search around a single
location)
x
: sort the list by the distance from your current position in a straight line
(available when you search around a single location)
x
: sort the list by the distance to drive on route from your current position
(available when you search along the active route)
x
: sort the list by the size of the needed detour (available when you search
along the active route)
