background image

69 

 

 

For vehicle types where Green routing is not available, this method 

combines the benefits of Fast and Short. ZENEC calculates as if it 

were calculating the Fast route, but it takes other roads as well to save 

fuel. 

 

Note!  Depending on the vehicle type, some methods may not be available. 

4.3.1.2 Navigation Mode 

You can switch between on-road and off-road navigation by tapping 

 and 

selecting 

 or 

 (page 58). 

4.3.1.3 Road types 

To let the route fit your needs, you can also set which road types are to be considered for or 

to be excluded from the route. 
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your 

destination can only be accessed using some of the excluded road types, they are used only 

as much as necessary. In this case, a warning icon is shown on the Route information screen, 

and the part of the route not matching your preference is displayed in a different colour on the 

map. 
The following road types are available: 
 

Button 

Description 

 

You might need to avoid motorways when you are driving a slow car or 

you are towing another vehicle. 

 

Charge roads are pay roads where you can purchase a pass or 

vignette to use the road for a longer period of time. They can be 

enabled or disabled separately from toll roads. 

 

Per-use toll roads are pay roads where there is a per-use charge in the 

routes by default. If you disable toll roads, ZENEC plans the best toll-

free route. 

 

ZENEC includes ferries in a planned route by default. However, a map 

does not necessarily contain information about the accessibility of 

temporary ferries. You might also need to pay a fare on ferries. 

 

Car shuttle trains are used to transport vehicles for a relatively short 

distance and they usually connect places that are not easily accessible 

on a road, for example, in Switzerland. 

 

ZENEC excludes unpaved roads by default. Unpaved roads can be in 

a bad condition and you usually cannot reach the speed limit on them. 

 

Summary of Contents for Prime Z-EMAP66 Series



















































































Reviews: