ZENEC Prime Z-EMAP66 Series User Manual Download

Page: 36 / 82

5. (optional) If you have selected

, select the town to search in.

6. Select one of the main Place categories (for example, Accommodation), then browse

the subcategories (for example, Hotel or Motel) to find your destination.

7. You can turn the Category View off at any level to list all Places around the selected

location or along the route.

8. (optional) The Places in the list can be ordered by the following criteria:

•

Name

•

Their distance from the current or last known position

•

Their distance from the selected town

•

Their distance from the destination

•

The length of the necessary detour.

Tap

to reorder the list.

To filter the list of results by providers, tap

and then the provider logo on the

right side of the screen.

9. Browse the list and tap one of the list items. A full screen map appears with the

selected point in the middle. The name and address of the Place is displayed at the top

of the screen.

10. The process continues the same way as in case of any other search for Places. See

page 33.

Summary of Contents for Prime Z-EMAP66 Series


















































































Search results

Summary of Contents for Prime Z-EMAP66 Series

Reviews:

Related manuals for Prime Z-EMAP66 Series

Brands by name

Popular brands

ZENEC Prime Z-EMAP66 Series, User Manual

Search results

Summary of Contents for Prime Z-EMAP66 Series

Reviews:

Related manuals for Prime Z-EMAP66 Series

Brands by name

Popular brands