64
64
Button
Description
In this case a warning icon will be shown on the Route Information
screen, and the part of the route not matching your preference will be
displayed in a different colour on the map.
Route Calculation Method You can choose from different route types. The routing method can also
be chosen while creating the route: when the destination is selected, tap
in the Cursor menu.
Highway Mode
You can turn the Highway mode on or off. See page 15 for details.
Use Traffic Information
(available only if your
hardware supports TMC)
When TMC messages are received, this setting tells ZENEC Navigation
Software whether to use that information in route planning.
Recalculate to Avoid Traffic
(available only if your
hardware supports TMC)
This setting determines how ZENEC Navigation Software uses the
received TMC information in route recalculation:
x
Automatic: When route recalculation becomes necessary based
on the received TMC events, ZENEC Navigation Software
recalculates the route automatically.
x
Manual: When route recalculation becomes necessary based on
the received TMC events, ZENEC Navigation Software notifies
you, but you can decide whether to recalculate the route or not.
x
Disabled: TMC events are only taken account when the route is
recalculated in an off-route situation.
Road Types Used for Route Planning:
Type
Description
Motorways
You might need to avoid motorways when you are driving a slow car or you are
towing another vehicle.
Unpaved roads ZENEC Navigation Software excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit on them.
Toll roads
By default ZENEC Navigation Software includes toll roads (pay roads where there is
a per-use charge) in the routes. If you disable toll roads, ZENEC Navigation
Software plans the best toll-free route.
Charge roads
Charge roads are pay roads where you can purchase a pass or vignette to use the
road for a longer period of time. They can be enabled or disabled separately from
toll roads.
Permit needed You might need a permit or permission from the owners to use certain roads or to
enter certain areas. ZENEC Navigation Software excludes these roads from the
route calculation by default.
Ferries
ZENEC Navigation Software includes ferries in a planned route by default.
However, a map does not necessarily contain information about the accessibility of
temporary ferries. You might also need to pay a fare on ferries.
Cross-border
planning
In some cases the route calculated according to your other navigation and route
preferences would lead through another country. If you wish to always stay within
the same country, turn this option off.