67
67
Button
Description
Autodetect
Tap this button and let ZENEC Navigation Software find and connect
to the TMC receiver.
With a TMC receiver already connected, the content of the screen is different:
Button
Description
Use Auto-tuner
If Auto-tuner is enabled, the tuner of ZENEC Navigation Software
sweeps through the FM CCIR radio band searching for a TMC signal.
The first station with TMC data will be used automatically. When no
TMC signal is available, the tuner keeps on searching. Turn off Auto-
tuner to select a radio station manually.
,
When Auto-tuner is turned off, search for the desired radio station
manually with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station on an
exception list, and make ZENEC Navigation Software search for
another station instead.
Show Excluded Stations
This button opens the list of radio stations previously excluded. You
can re-enable any or all of the excluded stations.
4.5.7 Warning settings
You can enable speed warning. Tap the following buttons:
,
,
.
Button
Description
Warn When Speeding
Maps may contain information about the speed limits of the road
segments. ZENEC Navigation Software is able to warn you if you
exceed the current limit. This information may not be available for your
region (ask your local dealer), or may not be fully correct for all roads
in the map. This setting lets you decide whether you wish to receive
the warnings. You can set the relative speeding level at which the
application warns you (100% represents the current speed limit):
x
In Built-up Areas: in cities and towns
x
Elsewhere: at all other locations
There are two types of warnings. You can turn them on or off
independently:
x
Audible Warning: A voice message is played using the selected
voice guidance profile.
x
Visible Warning: A symbol with the speed limit appears in the
corner of the map (for example:
).
