Zelmer ZPI6010BE, Instruction Manual

Page: 48 / 52

48
PI-004_v02
Operating the hob
1
Switch on the hob with the button. All indicators will
show “ ”.
2
Place the utensil in the selected heating zone.
3
Select the desired power level (1-9) using the ,
buttons. The default setting is 5.
If you simultaneously press the , buttons for the
given heating zone, the power setting will be reduced to
0 and the heating zone will stop operating.
After removing the utensil from the heating zone, the
heating zone stops operating and the symbol “ ” on the
power level indicator will fl ash for one minute. After that
the heating zone switches off (symbol “ ”).
If you place the utensil back on the heating zone
when the symbol “ ” is fl ashing, the heating zone will
automatically return to heating at the previous setting.
4
After operation, switch off the hob with the button.
The hob will switch to the standby mode and after 2 minutes
it will switch off
Power and size of the individual heating zones
Heating
zone
Size
Operation
mode
Maximum power
Type ZPI6012UE Type ZPI6014UE
I
∅
180 mm
Normal
mode
2000 W 2000 W
BOOSTER
function
2800 W 2800 W
II
∅
180 mm
Normal
mode
1500 W 1500 W
BOOSTER
function
– 2000 W
III
∅
180 mm
Normal
mode
2000 W 2000 W
BOOSTER
function
2800 W 2800 W
IV
∅
140 mm
Normal
mode
1500 W 1500 W
BOOSTER
function
– 2000 W
Heat indicator
When using the hob for a longer period of time, the given
heating zone remains hot for some time after switching the
appliance off. The symbol “ ” on the power indicator of the
given heating zone warns against accidental touching of the
hot hob.
Detecting improper items
If an item of an improper size (scissors, knife, fork, keys
etc.) or a non-magnetic utensil is placed on the hob, it will
automatically switch to the standby mode
Overheat protection
The hob is equipped with a built-in sensor, which measures
the temperature inside the hob. If the permitted temperature
value is exceeded, the induction hob will automatically
switch off.
Automatic switch off
When the heating zone is switched on without any operation,
the hob will switch off automatically upon the lapse of
a default time depending on the set power level. See table
below:
Power level Time
1-3 8 hours
4-6 4 hours
7-9 2 hours
BOOSTER function
The BOOSTER function temporarily increases the power of
the given heating zone.
The BOOSTER function operates for a maximum of 5
minutes and afterwards the heating zone returns to the
previous power setting.
To switch on the BOOSTER function, the power indicator
on given heating zone must fl ash.
1
Press the button.
2
The symbol “ ” will appear on the power level indicator
and the heating zone will start operating with the maximum
power.
3
Press the button to switch off the BOOSTER
function. The power level of the heating zone will return to
the previous setting.
ZPI6012UE model:
Only two heating zones: I and III may use the BOOSTER
function.
While the BOOSTER function is active in the heating
zone I, the power of the heating zone II is automatically
reduced to level 2.
The same concerns the heating zones III and IV.
ZPI6014UE model:
The BOOSTER function may be simultaneously active in
only two heating zones: I and III, I and IV, II and III as well
as II and IV.
While the BOOSTER function is active in the heating
zone I, the power of the heating zone II is automatically
reduced to level 2 and vice versa.
The same concerns the heating zones III and IV.