Zelmer ZPI6010BE, Instruction Manual

Page: 49 / 52

49
PI-004_v02
TIMER function
1
Select the desired power level of the selected heating
zone using the , buttons.
2
Press the button within 5 seconds (when the power
indicator is fl ashing) and set the desired time (max. 120
minutes) with the , buttons. If you press and hold
the or button, the time will respectively increase or
decrease by 10 minutes.
3
Con fi rm the settings by pressing the button. Upon
the lapse of the set time a single beep will be heard and the
heating zone will switch off.
To cancel the TIMER function during operation,
●
simultaneously press the , buttons.
A glowing dot symbol next to the power indicator e.g.
“ ” indicates that the TIMER function is enabled for the
given heating zone.
If you do not select any heating zone (within 5 seconds)
before pressing the
button, the TIMER function will
not be set to any heating zone. After the lapse of the set
time, a 30-second beep will be heard.
LOCK function
The LOCK function enables to block all the buttons (except
for
and buttons).
1
Press to block the buttons.
2
The TIMER indicator will show the symbol “ ”.
3
To unblock the buttons press and hold the button.
If you switch off the hob with the button when the
LOCK function is active, to switch it back on you have to
press the button and unblock the hob by pressing
and holding the button.
Cleaning and maintenance
Remember to keep the hob clean.
Unplug the appliance and before cleaning.
Do not use steam jets to clean the hob.
●
Light dirt
●
wipe the hob with a cloth socked in lukewarm
water wipe until dry with a sponge.
Heavy dirt
●
wipe the hob with a cloth socked in lukewarm
water wipe until dry with a special sponge for cleaning
glass.
Limestone and other residue
●
remove the dirt by applying
a small amount of special substance for cleaning ceramic
glass or white wine vinegar and next wipe with a dry cloth.
Sweetmeat, melt aluminum, plastic
●
remove by using
a special scraper suitable for cleaning glass and next
wipe with a damp cloth. If necessary use a special
substance for cleaning ceramic glass.
Display and control of errors
The most common problems together with the remedies are
described below.
In case of a malfunction, the induction hob will automatically
switch on the protective mode and one of the following codes
will be displayed:
F0 / F1 / F2 – NO VENTILATION – contact the service center.
F3 - F8 – INCORRECT VOLTAGE – switch the appliance off
and switch it back on. If the problem persists, contact the
service center.
E3/E4 – INCORRECT TEMPERATURE – check the utensil.
E5/E6 – INCORRECT HEAT DISTRIBUTION – switch off the
appliance, allow to cool down and switch it back on.
Never attempt to repair the appliance by yourself!
Ecology – environment protection
Each user can protect the natural environment. It is neither
dif fi cult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the
dangerous elements of this appliance, which
can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!
The manufacturer/importer does not accept any liability for any
damages resulting from unintended use or improper handling.
The manufacturer/importer reserves his rights to modify the product
any time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.