Zelmer ZJE3800 User Manual Download

Page: 8 / 41

4. Note: when pressing food with the pushing bar, the force used must be even or indirect. The pressing

force cannot be more than 1 kg and cannot be too sudden. Otherwise, the juicing effect will be reduced.

OPERATING TIME

This machine is designed with button switches for O, I, and II positions (O for stop, I for weak operation,

II for strong operation). For juicing, select strong operation. After operating for 1min, stop the machine for

1 min and then use it again. After the above operation is performed for three times, stop the machine for

15 min and do not operate it until the motor is cooled. In this way, the service life of this machine will be

extended and the machine will operate more efficiently.

NOTES

1.This machine cannot be made available to people who are weak, unresponsive or have mental disorders

(including children), unless they are under supervision or help from a person who is responsible for their

safety. Children should be supervised to make sure they do not play with the machine.
2.Before using, put this machine on a stable and even surface and operate it according to the above in

structions.
3.Before juicing, first confirm juicing net and rotor are clutched in position, and there is no hard contact

between the juicing net cutter and the transparent cover. Put the transparent cover on, fasten the handle

tight and then turn the machine on.
4.When used for the first time the motor works in running-in phase. Slight peculiar smell and sparks may oc

cur at this time, which is normal. After the motor works for some time, the above phenomena will disappear.
5.During juicing, make sure there is not too much juice and pulp in the middle part and the pulp container.

If the elements are filled, please cut off power supply, remove the juice and pulp and then use the machine

again.
6.During using, do not open the cup cover. If power supply is on, do not put your hand or any items into the

mixing cup or inlet. Otherwise, harmful accident may occur or the machine may be damaged.
7.In order to extend the service life of the machine, over-heating protective device is mounted on the motor.

If the motor works for a long time or is overloaded, when warning temperature is exceeded, the power

supply will automatically cut off. After the motor stops, pull out the power supply plug, wait for the motor to

cool (for about 30 min) and use the machine again.
8.During operation, never leave the machine or let children operate it.
9.After operation, do not remove the pulp until the plug of power supply is pulled out.
10.The juicing net is very sharp and in order to avoid danger when cleaning it, please put the juicing net

under water tap for washing and wash it very carefully.
11.This machine must not be used for purposes other than specified.
12.If the power supply cord is damaged, in order to avoid danger, replacement must be performed by the

manufacturer or its service department or similar professionals.

MAINTENANCE AND CLEANING

1.This machine needs to be used regularly so as to keep the motor dry and clean.
2.If the machine is nit used for a long time, store it in a dry and well-ventilated place so as to prevent the

motor from getting damp and moldy.
3.Never wash the main machine. When cleaning, only wipe it with a wet cloth. Other components may be

washed directly with water, for example the pushing bar, cover, middle part, pulp container, juice outlet

cover.

NOTES FOR USE

*Please read the following instructions before using the machine

1. The materials should be put into the machine slowly and one after another. New materials should be put

only after the previous materials have been squeezed.
2. The materials with large fiber content (such as celery) should be cut into smaller pieces (1-2cm). (The

materials with particularly strong fiber should be put into the machine slowly after being cut into blocks of

about 3cm).
3. When carrot stored at low temperature for over 1 year is used for squeezing, it is better to make it

squeezed together with other materials which have high moisture content (such as pear or orange), be

cause such carrot has lower water content. There will be more juice if new materials are put into the ma

chine after the previous materials have been squeezed (the juice quantity will vary depending on the water

content of materials).
4. The juice quantity will be lower if the materials are not fresh. When dry materials stored in refrigerator

are used for squeezing, the materials should be squeezed after being immersed in clean water for sufficient

water absorption, so that the juicing effect is better.
5. Hard materials are not suitable for juicing.
6. Some friction noise will be heard when carrot (hard flesh) or apple (hard peel) is used for squeezing, but

it will not affect the product negatively.
7. Juice might splash from the inlet when materials such as cherry tomatoes and grapes are used for

squeezing.

TROUBLE SHOOTING

Problem

Solution

The appliance does not work

Please check whether the appliance is
plugged and it is assembled correctly

The motor is smells strange

It is normal that some smell is emitted from
motor during the initial use. The smell will be
disappeared after the machine has been used
several times. Extensive working time may
cause abnormal smell. In such case, please
turn the machine off and let it cool down for
60 mins

The filter blade or motor unit is blocked during
operation

Turn off and disassemble the machine and
then clean up the blocking fruit pieces

Can boiling water be used to clean the
components?

It cannot be used. Please let the water
cool down to 60 degree and then clean the
components

Can detachable components be put into a
dishwasher?

The motor unit cannot be cleaned in a
dishwasher