background image

81

IR4200-001_v01

Dear Customers!

Congratulations  on  your  choice  of  our  appliance,  and 

welcome among the users of Zelmer products.

In  order  to  achieve  best  possible  results  we  recommend 

using  exclusively  original  Zelmer  accessories.  They  have 

been specially designed for this product.

We urge that you read this user’s manual carefully. Special 

attention needs to be paid to the safety precautions. Please 

save this manual so it can be referred to in the future use of 

the product.

Important safety and proper handling 

instructions

Always keep these basic safety instruction during ironing:

age when it is energized or cooling 

down.

 

The  iron  is  not  to  be  used  if  it  has 

been  dropped,  if  there  are  visible 

signs of damage or if it is leaking.

 

Empty the tank after each usage.

 

If  any  part  of  the  iron  is  damaged, 

it  must  be  replaced  by  the 

manufacturer or its service agent or 

similarly qualified person in order to 

avoid a hazard.

 

It  can  be  refurbished  by  qualified 

staff  only.  Improper  refurbishment 

can  cause  serious  hazard  for  the 

user. In case of any defects, please 

contact service desk.

 

Do not use the appliance when it is 

damaged or performs abnormally.

 

Do not touch the iron rest during or 

just after ironing. It is hot!

 

Do  not  touch  the  surfaces  marked 
with symbol 

 during or just after 

ironing. It is hot (Please refer to the 

following figure 1 and figure 2).

Caution: 

 

Hot surface!

Figure 1: Right side

Figure 2: Left side

 

The  appliance  generates  high 

temperature.  Use  it  carefully  and 

warn  other  users  against  possible 

hazard.

 

Keep  special  care  when  ironing  in 

presence of children. Do not allow to 

touch the iron during ironing.

 

Do  not  allow  children  to  perform 

cleaning  and  user  maintenance 

when they are without supervision.

 

DANGER! / WARNING!

Health hazard

 

The iron must be used and rested on 

a stable surface.

 

The  plug  must  be  removed  from 

the  socket-outlet  before  the  water 

reservoir is filled with water.

 

If the non-detachable part of the cord 

is damaged, it should be replaced by 

the producer or at a proper service 

point  or  by  a  qualified  person  in 

order to avoid any hazards.

 

The  filling  aperture  must  not  be 

opened during use.

 

This  appliance  can  be  used  by 

children  aged  from  8  years  and 

above  and  persons  with  reduced 

physical,  sensory  or  mental 

capabilities or lack of experience and 

knowledge  if  they  have  been  given 

supervision or instruction concerning 

use  of  the  appliance  in  a  safe 

way  and  understand  the  hazards 

involved. Children shall not play with 

the  appliance.  Cleaning  and  user 

maintenance  shall  not  be  made  by 

children without supervision.

 

Keep  the  iron  and  its  cord  out  of 

reach of children less than 8 years of 

EN

Summary of Contents for IR4200

























































































Reviews: