Service Instructions VISUCAM
lite
Issue: 22.09.2003
SM-30-4044-A1-en
Replaces issue:
Page
14
of 41
Replacing the light guide
•
Open the camera head (see:
Opening and
closing the camera head
).
•
Loosen the upper mount of the light guide
and push the light guide through the hole.
•
Press out the light guide from the clip.
•
Loosen the lower mount of the light guide
and remove the light guide.
•
Insert the new light guide accordingly,
push it all the way into the mounts and
lock it in position.
•
Close the camera head (see:
Opening
and closing the camera head
).
•
Switch on VISUCAM
lite
and check
its functions.
Exciter filter assembly
Installing / removing the Exciter filter assembly
•
Open the camera head (see:
Opening
and closing the camera head
).
•
Disconnect the stepper motor cable at
X8
and the opto-coupler cable at
X5
from the
control PCB and remove the cable mounts.
•
Screw out 2 fastening screws and remove
the complete module.
•
Stepper motor, opto coupler or filters can be
replaced.
•
Re-insert the module and secure it in
position.
•
Re-route and connect the cables for the
opto-coupler and the stepper motor.
•
Close the camera head (see:
Opening and
closing the camera head
).
•
Switch on VISUCAM
lite
and check its functions.
Clamp
Hole
Securing screw
Clamp screw
Summary of Contents for VISUCAM lite
Page 38: ......
