![background image](http://html1.mh-extra.com/html/zeiss/colibri-2/colibri-2_operating-manual_3307572016.webp)
START-UP
Colibri.2
Unpacking the illumination system
Carl Zeiss
07/2014
423052-7244-001
15
3
START-UP
The Colibri.2 illumination system consists of the following main parts:
−
Colibri.2 lamp module
−
Control unit
−
Control panel
The device can be assembled by the customer.
The lamp module is completely mounted according to customers' order, including LED modules and
beam combiners. If necessary, the LED modules and beam combiners can be changed quickly and easily
by the customer (see Section 5).
3.1
Unpacking the illumination system
The lamp module, the control unit and the control
panel, as well as the optional accessories are
supplied separately in customary packaging.
Remove all parts from the packaging and check
them for completeness according to the delivery
note.
For use with confocal Laser Scanning Microscopes
the illumination system Colibri.2 (Fig. 3-1/
1
) is
delivered with tightly mounted illumination
adapter (Fig. 3-1/
2
).
For laser safety reasons the connection between illumination adapter and lamp module is no
customer interface. Disregard results in losing laser safety of the system.
The Colibri.2 lamp module can be only used with the upper part of its housing properly mounted. As
soon as the upper part of the housing is removed, a safety switch (interlock) will switch off the LED
modules.
Fig. 3-1
Attaching the illumination adapter
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com