Carl Zeiss
Axiotech and Axiotech
vario
2-8
B 40-020 e 06/99
2.5
Insertion of eyepieces
☞
All Axiotech microscopes are equipped
with two focusing eyepieces.
An overview of available eyepieces is
given in section 1.5.
•
Remove both protection caps (2-9/
1
) from the
binocular phototube (2-9/
2
).
•
Insert focusing eyepieces (2-9/
4
) into the
eyepiece tubes (2-9/
3
).
•
If one focusing eyepiece is available, set diopter
zero position to the white dot (
W
) of the
eyepiece ring and focus on the object with the
eye with less ametropia via the coaxial drive.
•
Then set the focus for the eye with a higher
prescription through the second eyepiece until
the object is clearly defined and seen in focus
with both eyes.
☞
Particularly in reflected-light
polarization contrast or fluorescence
techniques of low light intensity, the
standard rubber rings (2-10/
2
) can be
replaced with fold-down rubber
eyecups (2-10/
1
) to protect the
eyepieces from stray light.
Fig. 2-9
Insertion of eyepieces
Fig. 2-10
Change of eyecups
Summary of Contents for Axiotech
