Operation
Axiostar
plus
Attaching
ICS
double tube
Carl Zeiss
B 40-815 e 12/01
3-17
3.8
Attaching
ICS
double tube
•
Loosen knurled screw (3-12/
4
) on the stand
and remove binocular tube, if available.
•
Remove dust cover from the underside of
the tube.
•
Press the
ICS
double tube (3-12/
1
) to the
right in a slightly inclined position into the
spring of the stand mount.
•
Then set the double tube
ICS
by lowering
the left side into the dovetail of the stand
mound. This will secure the double tube
ICS
from falling out.
•
Turn the
ICS
double tube into the required
viewing direction and use the knurled screw
(3-12/
4
or hexagonal screw) to clamp it into
the threaded opening (3-12/
5
). Both the
illustrated rotation and the 90° backward
rotation are possible. Accordingly, the
controls of the
ICS
double tube are
accessible to the user from the side or from
the front.
•
Remove dust caps from the eyepiece tubes
and insert two eyepieces each (3-12/
2
) with
the same field number 18 or 20.
•
Insert country-specific adapter (3-12/
9
) into
the power unit (3-12/
8
).
•
Insert angled connector (3-12/
10
) of the
power unit into the 12 V 3-12/
3
) of the ICS
double tube.
•
Use the enclosed self-adhesive cable holders
(3-12/
11
) to suitably attach the cable to the
stand and guide it to the back.
•
Connect power unit to the line.
The ICS double tube is operated via:
•
Adjusting lever (3-12/
7
) for the positioning
of the light pointer in the microscope image
•
Control (3-12/
6
) to set the brightness of the
light pointer.
1
ICS
double tube
2
Eyepieces
3
12 V socket
4
Knurled screw (or hexagonal screw)
5
Threaded opening for knurled screw or hexagonal
screw
6
Control for intensity of light pointer
7
Adjusting lever for light pointer
8
Power unit
9
Country-specific adapter
10
Angled connector
11
Cable holder
Fig. 3-12 ICS double tube
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
