Start-up
Axiostar
plus
Attaching tube
Carl Zeiss
B 40-815 e 12/01
2-9
2.3.3
Attaching binocular tube 30°/20
ICS
Using the binocular tube/phototube 30°
ICS
with the ergonomic base plate offers the best
ergonomic conditions for microscope use. The
adapter for 30° tubes is required to attach the
binocular tube 30°
ICS
to the stand. If necessary,
first remove the 45°
ICS
tube from the stand.
•
Remove dust cap from tube underside.
Loosen knurled screw (2-5/
4
) or hexagonal
screw on the stand.
•
Press the adapter for 30° tubes (2-5/
2
)
slightly to the right into the spring of the
stand.
•
Then set the adapter in the dovetail of the
stand by lowering the left side. This secures
the adapter from falling out.
•
Turn the adapter to align the outer edges
parallel to the stand; the clamping screw for
the 30° tube should point to the right.
•
Tighten knurled screw (2-5/
4
) or hexagonal
screw.
•
Place the 30°
ICS
tube (2-5/
1
) in the adapter
(2-5/
2
), align the outer edges and tighten
clamping screws (2-5/
3
) on the adapter.
Proceed the same way when attaching the
phototube 30°
ICS
.
1
Binocular tube 30° ICS
2
Adapter for 30° tubes
3
Clamping screw
4
Knurled screw
Fig. 2-5
Attaching binocular tube / phototube 30°
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
