Zeiss Axiocam 512 color, User Manual

Page: 17 / 24

5 Connecting the Camera | 5.5 Connecting the trigger cable ZEISS
5.5 Connecting the trigger cable
In this chapter you will learn how to connect the trigger cable (optional) to the camera and the
SVB (signal distribution box).
Fig. 5: Trigger cable
Number Description
1 Trigger (Trigger-In)
2 GPO 0 (Trigger Out, for exposure time incl. predelay, coresponding to
shutter control
3 GPO 1 (Trigger Ready, for Readout Time data)
4 GPO 2
5 GPOPWR
6 AUXPWR
7 Commercial Micro-D
The numbers in brackets in the guide below refer to the connectors shown in the illustration
"Trigger cable" and described in the table below it.
1. Plug the connector Commercial Micro D (7) in the trigger connector on the back of the
camera, see Camera Overview [
}
15] .
User Guide ZEISS Axiocam 512 color/mono | en-US | Rev.1 17