5 Connecting the Camera | 5.1 Camera Overview
ZEISS
5 Connecting the Camera
5.1 Camera Overview
Camera connections
Fig. 4: Camera back
Number
Description
1
Trigger connection
2
USB 2.0 connection for power supply and cooling
3
USB 3.0 connection for image / controller data and power supply
4
¼ “ photo thread (tripod connection)
5.2 Building in the interface card
This chapter describes how to build in the PCI express interface card (4 x USB 3.0) into your PC.
NOTICE
Static Electricity
Static electricity can damage electronic components. To protect electronic components against
static electricity, do not touch them until you have grounded yourself to the casing of the de-
vice. Never touch the contacts of the electronic components. We also recommend that you
work only on an antistatic mat.
Prerequisite
ü
You have read the documentation of the interface card and of your computer before inserting
the interface card.
1. Switch off your PC and all connected peripherals.
2. Disconnect the PC and the peripherals from the mains and open the computer case.
3. Examine your PC’s power supply to see if it has Molex type connectors or SATA type con-
nectors. Choose the appropriate power connector cable for the following steps. If your PC’s
power supply has both connector types, choose only one cable.
User Guide ZEISS Axiocam 512 color/mono | en-US | Rev.1
15
Summary of Contents for Axiocam 512 color
Page 1: ...User Guide ZEISS Axiocam 512 color mono ...
Page 23: ......
