ATLAS Model 9000
Parts Removal/Replacement
Confidential and Proprietary
63041A0208
3-11
Service Manual
3.9 Motherboard/Optical Drive Removal
1)
Remove the Operator Cover (Section 3.3).
2)
Remove the cables from the interface side of the PCB.
3)
Loosen the 2 spring screws located between the Motherboard and the DVD Drive.
4)
Remove the two 3mm screws on the outside edge of the CPU module (interface side).
5)
Lift the assembly module to clear it from the chassis and maneuver the module out.
6)
When the cable connectors at the interior of the board are accessible, remove the cables.
Note –
The Motherboard Power Connector Support Tool is required when reconnecting
the power connector to the Motherboard. Place the support tool underneath the
Motherboard at the middle of the power connector to keep the Motherboard from
flexing while attaching the power connector.
Figure 3.10 CPU Assembly Removal
Figure 3.11 CPU Assembly Complete
Summary of Contents for ATLAS 9000
