Safety Notes
Microscope Illuminator
Carl Zeiss
General
HBO 50
4
M60-2-0014 e 05/2012
1
Safety Notes
1.1
General
Before attaching and starting up the illuminator,
carefully read this operating manual. If you
need additional information, contact Carl Zeiss
Service or an authorized Carl Zeiss service
agency.
To ensure reliable and troublefree operation of
the microscope illuminator, make sure to
observe the precautions and warnings given in
this operating manual.
Only use this microscope illuminator on Carl
Zeiss microscopes.
For the microscope Axiovert 40 or 25, use the
HBO 50 with the Cat. No. 423003-9010-000.
Additionally, observe the provided operating
manual describing the function of the
ebq 52 ac lamp power supply.
Particularly observe the safety notes given in this
operating manual.
For the handling and operation of the burner
(lamp) of the HBO 50, observe the specifications
and safety instructions of the lamp
manufacturers, (e.g. OSRAM).
The HBO 50 illuminator may only be
used by personnel appropriately
trained or instructed by Carl Zeiss
Service!
Only Carl Zeiss Service is allowed to open the
lamp power supply!
The following warning and information symbols
are used in this operating manual:
WARNING!
Non-compliance with this warning message
may cause personal injury.
CAUTION!
Dangerous electric voltage.
CAUTION!
Hot surface.
CAUTION!
Escape of UV radiation.
CAUTION!
Before any intervention in the device,
disconnect the power cable.
CAUTION!
Non-compliance with this safety note may result
in damage to the equipment.
NOTE!
Note to be observed in using the HBO 50
Microscope Illuminator.
