Microscope Illuminator
Safety Notes
HBO 50
Illuminator, Regulations, Unpacking, Storage, Transport
Carl Zeiss
M60-2-0014 e 05/2012
5
1.2
Note on illuminator
CAUTION!
Hot surface.
1.3
Regulations for device
safety and electromagnetic
compatibility
The HBO 50 Microscope Illuminator has been
produced and tested in compliance with
EN61010 Part 1 (VDE 0411). It was delivered in
a safe and perfect condition.
The equipment meets the requirements of the
EC Directives 2006/95/EC, Low voltage directive
and 2004/108/EC, EMC directive.
The equipment has to be disposed of in
compliance with the WEEE Directive
2002/96/EC.
The equipment carries the
mark.
The equipment complies with the standards DIN
EN 61326 Class B and DIN EN 6100-3-2.
1.4
Notes on unpacking,
transport and storage
Even if not in use, the burner are under
high pressure.
Always wear a face shield (Cat. No. 417009-
0000-000) and protective gloves with artery
protection (Cat. No. 417008-0000-000) when
you remove the HBO 50/AC L1 / L2 burner from
its packaging or when you deposit it there for
disposal (e.g. when replacing the burner).
Carry and dispose of the burner only in their
original packaging.
In transport, the burner in the microscope
illuminator is replaced by a protective fixture for
safety reasons.
Note the transport and storage temperatures
specified for the microscope stands.
