background image

2 - EN

Foreword

 Read the manual of the ComfoAir XL and this 

document carefully before use.

This document provides all the additional information 
required for the safe and optimal installation of the 
ComfoAir XL and ComfoAir Eco in three parts. In this 
following document they will be referred to as “the 
unit”. The unit is subject to continuous development 
and improvement. As a result, the unit may slightly 
differ from the descriptions. After reading this 
document you can assemble the three different 
parts (Ventilation, Heat Recovery and Filter section) 
correctly to one complete ComfoAir XL air handling 
unit.

 Questions

Please contact the supplier if you have any questions 
or would like to order a new document or new filters. 
The contact details of the main supplier can be 
found at  the end of this document.

The following pictograms are used in this 
document:

 Point of attention.

 Risk of:

 

-  damage to the unit;

 

-  performance of the unit is compromised if 

instructions are not observed carefully.

 Risk of personal injury for the user.

The following terms are used in this document:

  The ‚service side‘ of the unit is referred in the 

document as the ‚front side‘;

  Part 1: Ventilation section (= FAN);

  Part 2: Heat Recovery section (= PHE);

  Part 3: Filter section (= FIL).

All rights reserved.

This document has been compiled with the utmost care. The publisher cannot be held liable for any damage 
caused as a result of missing or incorrect information in this document. In case of disputes the English version of 
this document will be binding.

Summary of Contents for ComfoAir XL

















Reviews: