25
13. Push the unit into the wall mounting pipe as far as it will go, taking into account the electrical connections.
Take care to ensure that the lower side of the EPP housing rests on the wall bracket. If necessary, push the upper
frame of the wall bracket slightly upwards.
In the final mounting position, the front side of the EPP housing has to line up with the front edge of the wall
bracket, or somewhat behind it; if necessary, the wall bracket must be adjusted using spacers.
14. Pivot the lower canopy against the EPP housing. In the process, press the lower canopy slightly away from the wall bracket in
order to pivot it in front of and past the edge of the wall bracket without interference.
Take care to ensure that the ribbon cable is located in the designated recess of the EPP housing when installing
the lower canopy.
15. Fix the lower canopy in place on the wall bracket by installing the right screw and tightening both.
16. Place the upper canopy onto the EPP housing, following the instructions given in 3.4.1.
