13
1. General:
1.1 Introduction
This operating manual is valid for the submersible pump of the type series FSP.
If the instructions of the operation manual – especially the safety instructions - are not
observed, or in case of unauthorized modifications of the device or the installation of non-
original spare parts, the guarantee expires automatically. The manufacturer assumes no
liability for damages resulting from such behaviour!
Such as any other electrical device, this product may fail due to absence of mains voltage or a
technical failure. If damage could occur, an emergency power supply, a second plant and/or an
off-grid alarm device should be provided according to the application. We as manufacturer are
at your disposal for consultation also after the purchase. In case of failures or damages, please
contact your retailer.
Manufacturer: ZEHNDER Pumpen GmbH
Zwönitzer Straße 19
08344 Grünhain-Beierfeld
Date of manufature: The date of manufacture of the pump is engraved on the top of the housing.
Manufactured size:
FSP 330 (low drain pump)
State of the operation manual: October 2009
1.2 Enquiries and orders
In case of enquiries or orders, address yourself to your specialist retailer.
1.3 Technical data:
TYPE:
FSP
330
Pressure pipe connector
1“
max. particle size
1 mm
Input power P1
300W
Power reception
1.3 A
Supply cable
10 m
Floating switch
no
max. discharge flow
5500 l/h
max. discharge height
7.0 m
max. submersion depth
5.0 m
Materials:
Pump housing:
Polypropylene (PP)
Outer housing:
Polypropylene (PP)
Motor housing:
Stainless steel
Running wheel:
PA 6
Screws:
Stainless steel
Motor shaft:
Stainless steel
The submersible pump FSP is applicable up to a liquid temperature of 40 °C.
