ZyPer4K-M
User Manual Revision 2.5
When a valid video source is being received by an Encoder, the “VID” LED on the front panel
will be illuminated.
Video Input Connections (decoder):
Decoders support only a single type of
output; HDMI 2.0 supporting HDCP 2.2
Connect an appropriately rated HDMI
cable from the decoder unit to the display
device.
When powered, the Decoder will
immediately link with the display devices,
but no video will be shown, nor will the
“VID” LED be illuminated until a encoder-
decoder nexus is established.
User Manual
Page
of
29
53
