ZyPer4K-M
User Manual Revision 2.5
Setting Up ZyPer4K in a Point to Point Environment
A point to point, or one to one environment involves connecting one source directly to one
display. A network switch is not needed in this basic configuration. This environment also does
not require configuration through the ZyPer4K management software and is a true “plug and
play” setup.
If using analog audio, RS232 or Infrared, you may need to configure the Encoder and Decoder
with our management software. See the ZyPer4K Management Platform User Manual for more
information.
1. Connect HDMI cable from active source to Encoder (HDMI In port). Ensure Encoder is
plugged in and pwr LED light illuminated. When HDMI cable is connected, the video
(vid) light will illuminate.
2. Connect Ethernet cable either using SFP+ module (Fiber) or RJ45 jack (Copper) between
Encoder and Decoder. (Both Encoder and Decoder must be same configuration.
Fiber or Copper in this configuration)
3. Connect HDMI cable from active display to Decoder (HDMI Out port). Ensure Decoder is
plugged in and that pwr light is illuminated.
User Manual
Page
of
16
53
Digital Signage
Player
ZyPer4K Encoder
ZyPer4K Decoder
