Advanced Handheld CCD/Laser Scanner
58
P
ROGRAMMING
G
UIDE
Appendix 3: Multi-Barcode Editor
Introduction
The multi-barcode editor function allows users to set up the sequence of barcode data
transmission. After the configuration, the scanner would transmit data in the pre-
programmed sequence even if the user doesn’t scan barcodes in the correct order.
Users can set up the sequence of up to 5 pieces of barcode data.
The three parameters to be programmed are: barcode type, barcode length and check
digit.
Set up as “0” if the barcode length is not required; set up as “NUL” is there is no need
to check the first digit of the barcode value.
Use the ASCII table (Appendix 4) to set up barcode length and first digit
checkup. Be sure to enable the full ASCII code 39 option before you start
and read the “Set” label to set your choice into memory.
Summary of Contents for z-3101
Page 1: ...GLLS...
Page 2: ......
