Advanced Handheld CCD/Laser Scanner
6
P
ROGRAMMING
G
UIDE
Programming Procedure
Below is the programming procedure by using barcodes in this guide.
1.
Power up the scanner.
2.
Scan the
Start of Configuration
barcode.
3.
Scan the barcode for the desired feature. Multiple features can be
enabled/disabled before scanning the
End of Configuration
barcode.
4.
Scan the
End of Configuration
barcode and save the new configuration.
5.
To give up a configuration change, power off the scanner before scanning the
End of Configuration
barcode or scan the
Abort
barcode.
6.
For some parameter setting, such as barcode length and identifier code, it is
required to scan the
Set
barcode to save the configuration.
Default values are highlighted in gray background.
Power up the scanner
Scan the “
Start of
Configuration
” barcode
Scan barcode of the
desired feature
Scan the “
End of
Configuration
” barcode
Scan the
“Abort
”
barcode
Power off the scanner
Finish the configuration
Discard the configuration
Summary of Contents for z-3101
Page 1: ...GLLS...
Page 2: ......
