Zebex z-3101, Programming Manual

Page: 15 / 71

Advanced Handheld CCD/Laser Scanner 9
P
ROGRAMMING
G
UIDE
Start Of Configuration
3. General Scan Mode Setting
Handheld Operation
Barcode
Value
Barcode Label Description
SM01 Trigger Mode
 The scanner becomes inactive as soon as the data
is transmitted. It must be triggered to become
active again.
SM02 Auto Scan Mode
 The scanner is still active after the data is
transmitted but the successive transmission of
the same barcode is not allowed when the trigger
switch is pressed again.
SM04 Pulse Mode
 The scanner will light up and blink when press t
scanner trigger switch once and the scanner will
turn off after next pressing. The laser remains on
for approximately 3 to 10 seconds after the puls
light is on. he
e
SM05 Repeat Mode
 This mode is similar to Auto Scan Mode but with
scanner switch functional when enabled.
(Not available for Handheld High-Speed Laser Scanner.)
SM06 Momentary mode
 The scanner will light up only when the trigger
switch is pressed the scanner will turn off when
the trigger switch is release.
(Not available for Handheld High-Speed Laser Scanner.)
End Of Configuration