Zebex z-3101, Programming Manual

Page: 31 / 71

Advanced Handheld CCD/Laser Scanner 25
P
ROGRAMMING
G
UIDE
Start Of Configuration
3. Want Emulation Setting
Wand emulation is a standard interface but requires special firmware. If needed,
please contact your distributor.
Barcode
Value
Barcode Label Description
WD01 All barcode will be decoded and transmitted in that
symbology
WD02 Enable Wand output data format as Code 39
WO01 Wand emulation data output black = high

Scan this barcode to set quiet zones and spaces
low and bars =high.
WO02 Wand emulation data output black=low

Scan this barcode to set quiet zones and spaces
high and bars=low
WO03 Idle = high
 Idle state refers to the TTL logic level of the
Wand Emulation signal when not in use
WO04 Idle = low
 Idle state refers to the TTL logic level of the
Wand Emulation signal when not in use
WS01 Wand emulation speed---Low
 This option allows the transmission of wand
emulation at 1ms narrow element width
WS02 Wand emulation speed---medium

This option allows the transmission of wand
emulation at 600us narrow element width
End Of Configuration