10
Check that all bleed collar on the filling system are closed (see Fig. 7). Open the
Scuba cylinder valve. You will hear the humming sound of the check valve in the
SBA’s Fill Probe opening and the air moving from the high pressure source into
the small cylinder. When the pressures are equalized, the sound will stop and
the check valve in the SBA’s Fill Probe will automatically close. Close the valve
on the source Scuba cylinder. Bleed the air trapped between the SBA 1st Stage
and the source valve. The Transfiller bleed valve is opened by twisting the
bleed collar (pointed to by the red arrow near the 330-6052 part number in Fig.
7 above). Disconnect the Transfiller from the Fill Probe on the SBA. Replace
the Cap onto the male threads of the SBA’s Fill Probe. Close the Valve Hand
wheel on the SBA. The fill using the Transfiller is now completed. A stream-
ing video on the Zeagle website showing this procedure, can be accessed by
clicking on the following link;
Filling the RaZor SBA using the Transfiller (link
to Streaming Video)
Note that the video shows a brass Scuba version of the
RaZor with a Quick disconnect collar on the Transfiller. However, the SBA’s
filling procedure is the same.
Fig. 7
