Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
30
of
38
Figure 43 – Procedure for manually entering and scanning the Serial Number
Cercare Inverter
Search Inverter
Il numero di serie si trova nel lato destra dell’inverter
The serial number is located on the right side of the inverter
INTRODURRE CODICE
ENTER CODE
VALIDARE
VALIDATE
Manuale
Manual
Scrivi qui il numero di serie
Enter the serial number here
Cancellare
Delete
Salvare
Save
4)
Click “VALIDATE” to confirm the choice of inverter.
IMPORTANT: If you are unable to proceed after pressing VALIDATE, please ask ZCS to activate the
monitoring procedure. This operation can be done by simply sending the serial number of the inverter
(e.g.
ZE1ES330******)
and
of
the
Wi-Fi
card
(e.g.
080******)
by
to
[email protected], or by taking a photo of both labels found on the bottom right of the
inverter. The process for activating the data transmission will take a few days, after which you can
validate your code and proceed with the configuration of the app.
5)
In the next screen, enter the name of the system and select the installation location from the map (if the
GPS is active, the installation location will be automatically identified); as an option, you can enter the
description of the system and take or load a photo of the inverter.
