Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
17
of
38
4)
The status screen will open showing the information of the logger, such as the serial number and
firmware version.
Figure 23 – Status screen
5)
Click the Wizard setup, shown in the left column.
6)
In the new screen that opens, select the Wi-Fi network to which the Wi-Fi adapter is to be connected,
making sure that the Received Signal Strength Indicator (RSSI) is greater than 30%.
N.B.: check that the signal strength is greater than 30%, if not, bring the router closer or install a
repeater or signal amplifier.
7)
Click Next.
