Technical Note “Complete Guide to Monitoring the Azzurro ZCS Systems via Wi-Fi”
-
Rev. 1.2 of 20/05/2019
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
www.zcsazzurro.com
Page
14
of
38
Figure 18 - Main screen of status and verification of correct configuration
3.1 PROCEDURE FOR INSTALLING AN EXTERNAL WI-FI ADAPTER
Unlike the internal Wi-Fi card, the external adapter must be installed for all compatible inverters. However,
the procedure is quicker and more streamlined as there is no need to open the front cover of the inverter.
1)
Turn off the inverter following the procedure described in the manual:
a.
In the case of a photovoltaic inverter, first disconnect the AC line via the appropriate switch
installed on the wall and then the DC line via the appropriate switch installed on the wall or
the knob switch on board the inverter.
b.
In the case of a hybrid inverter, first disconnect the AC line via the appropriate switch installed
on the wall and then the DC line of the batteries (ON/OFF or POWER switch on board the
batteries) and the photovoltaic line (knob switch on the left side of the inverter)
2)
Remove the cover for accessing the Wi-Fi connector on the bottom of the inverter by unscrewing the two
cross screws, as shown in the figure.
Figure 19 – Seat of the external Wi-Fi adapter
