at your LAN.
• Interface
This is optional, WAN or LAN.
• Destination
This specifies where packets are bound for.
•IP Range Start
This specifies the starting-point of your specific IP addresses.
•IP Range End
This specifies the ending-point of your specific IP addresses.
•Protocol
This is optional, TCP, DCP, ICMP or *. Select which protocol you want to perform “Allow” or
“Deny”.
Note
* indicates you restrict no protocol to perform “Allow” or “Deny”.
•Port Range
This specifies your IP port range.
Schedule
You can set time when your AP performs firewall management, by enabling “from”.
Alternatively, if you desire your AP to perform firewall management for a long time, please
enable “always”.
When completing all firewall rules configuration, please click Add Rule. Firewall Rule List will
appear below.
Figure: 4-6 AG-3631 firewall list
28
== CONFIDENTIAL (All right reserved by Zcomax uk ltd) ==
19 Colindale avenue, London NW9 5DS
HTTP://www.zcomax.co.uk
Tel: +4420 8982 8200