ZComax AG-3621 Reference Manual Download Page 52

Page: 52 / 61

Upgrade Firmware

Note

When uploading software to the AG-3621 Access

19 Colindale avenue, London NW9 5DS

HTTP://www.zcomax.co.uk

Point, it is important not to interrupt the Web browser by closing the window,

clicking a link, or loading a new page. If the browser is interrupted, the upload

may fail, corrupt the software, and render the AG-3621 completely inoperable.

The software of the AG-3621 Access Point is stored in FLASH memory, and can be

upgraded as new software is released by Zcomax (UK) Limited. Upgrade files can be

downloaded from Zcomax (UK) Limited's Web site. If the upgrade file is compressed (.ZIP

file), you must first extract the image (.RMG) file before sending it to the wireless access

point. The upgrade file can be sent using your browser.

Note

The Web browser used to upload new firmware into the AG-3621 must

support HTTP uploads, such as Microsoft Internet Explorer 6.0 or above, or

Netscape Navigator 4.78 or above.

1. Download the new software file from Zcomax (UK) Limited, save it to your hard disk, and

unzip it.

2. From the main menu Management section, click the Upgrade Firmware link to display the

screen above.

3. In the Upgrade Firmware menu, click the Browse button and browse to the location of the

image (.RMG) upgrade file.

4. Click Upload. When the upload completes, your wireless access point will automatically

restart. The upgrade process typically takes about one minute. In some cases, you may

need to reconfigure the wireless access point after upgrading.

Tel: +4420 8982 8200

Summary of Contents for AG-3621




























































Search results

Summary of Contents for AG-3621

Reviews:

Related manuals for AG-3621

Brands by name

Popular brands

ZComax AG-3621, Reference Manual

Search results

Summary of Contents for AG-3621

Reviews:

Related manuals for AG-3621

Brands by name

Popular brands