Installing AG-3621 Access Point
Before installing, you should make sure that Ethernet network is perfectly working. You will be
connecting the AG-3621 to the Ethernet network so that computers with 10/100 Fast Ethernet
adapters will communicate computers on the Ethernet.
1.
SET UP THE AG-3621 ACCESS POINT Tip:
Before mounting the AG-3621 in a high location, first set up and test the AG-3621 to verify
wired network connectivity.
a. Prepare a computer with an Ethernet adapter. If this computer is already part of your
network, record its TCP/IP configuration settings.
b. Configure the computer with a static IP address of 192.168.1.x (x cannot be 1)and
255.255.255.0 for the Subnet Mask.
c. Connect an Ethernet cable from the AG-3621 to the computer.
d. Turn on your computer, connect the power adapter to the AG-3621 and verify the following:
– The PWR power light goes on.
– The LAN light of the wireless access point is lit when connected to a powered on computer.
2. 2 CONFIGURE LAN AND WIRELESS ACCESS
a. Configure the AG-3621 Ethernet port for LAN access
• Connect to the AG-3621 by opening your browser and entering http://192.168.1.1 in
the address field. A login window like the one shown below opens:
13
== CONFIDENTIAL (All right reserved by Zcomax uk ltd) ==
19 Colindale avenue, London NW9 5DS
HTTP://www.zcomax.co.uk
Tel: +4420 8982 8200