Key Features:
The AG-3621 Access Point is use-friendly and provides solid wireless and networking support.
The following standards and conventions are supported:
• Standards Compliant. The Wireless Access Point complies with the IEEE 802.11a/b/g for
Wireless LANs.
• WEP support. Support for WEP is included. 64-bit, 128-bit, and 152-bit keys.
• DHCP Client Support. DHCP Server provides a dynamic IP address to PCs and other
devices upon request. The AG-3621
can act as a client and obtain information from your
DHPC server.
•
RADIUS Accounting—Enable accounting on the access point to send accounting data
about wireless client devices to a RADIUS server on your network.
• SNMP Support. Support for Simple Network Management Protocol (SNMP) Management
Information Base (MIB) management.
• Multiple operating modes:
1. Access
point
2. Station
Adapter
3. Point-to-Point
Bridge.
4. Wireless
Repeater
5. Inter-building
•
Repeater mode—Configure the access point as a wireless repeater to extend the
coverage area of your wireless network.
•
VAPs
Assign
Multi-SSIDs on your access point (one SSID per VAP) to differentiate policies and
services among users forming a wide variety of VLANs.
•
QoS
Use this feature to support quality of service for prioritizing traffic from the Ethernet to the
access point. The access point also supports the voice-prioritization schemes used by
802.11a/b/g wireless phones.
•Transmit Power Control
Supports settable transmit power levels to adjust coverage cell size, ranging from full,
half(50%), quarter(25%) eighth(12.5%0 and min
•Atheros Super G Mode: Super G mode enables the transmission up to 108Mbps
• Multiple security settings per VLAN with up to 8 VLANs
Security settings for multiple groups – so employees, guests and contractors now easily and
6
== CONFIDENTIAL (All right reserved by Zcomax uk ltd) ==
19 Colindale avenue, London NW9 5DS
HTTP://www.zcomax.co.uk
Tel: +4420 8982 8200
