![background image](http://html.mh-extra.com/html/viega/manabloc/manabloc_product-instructions_1016702001.webp)
Product
Instructions
PI-PF 589133 1017 (UL Rated Access Panel) (EN ES FR)
1 of 2
Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: 800-976-9817
This document subject to updates. For the most current Viega technical literature please visit www.viega.us.
Viega ManaBloc
®
UL Rated Access Panel Installation
The Viega ManaBloc uninsulated UL rated access panel is
designed to fit between 16" on center framing or a similar
sized opening in a masonry wall.
The finished wall surface must be 1¼" thick in
order for the inner frame to allow proper
clearance of the supply and distribution tubing.
A
Assembly instructions:
1. Ensure rough opening is a sufficient size for
the access panel to fit and the finished wall is a
minimum of 1¼" thick.
2. With the panel in the open position, insert the
frame into the opening vertically.
3. For stud installations, use 1" or longer # 8 wood
screws to mount the frame to the studs. Use the
mounting holes present in the inner frame. Make
sure all tubing clears the frame edges before
attaching the frame to the studs. Attach optional
door spring (A).
4. Once the panel is latched closed you can open it
with the included keys or knurled knobs.
Key operation: Insert each key into the key slot and
turn them clock wise to release the latches.
Knob operation: Thread each knob into the key
opening hand tight. Once tight, the knob can be
turned a quarter turn clockwise to release the
latches.
Note:
Make certain to leave both panel keys and/or knobs
with the tenant or facility maintenance department.
1
3
4
2
Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar
with Viega products and their installation.
Installation by non-professionals may void Viega LLC’s warranty.