background image

English version

S W E E X . C O M

2

LW140 Wireless Broadband Router 140 Nitro XM
LW140UK Wireless Broadband Router 140 Nitro XM

Introduction

First of all, many thanks for purchasing the Sweex Wireless Broadband Router 140 Nitro XM. With this wireless router you can set up a wireless
network fast and efficiently. You can also simply share an Internet connection by means of the built-in router. 

To ensure this product operates correctly, we also advise you to carefully read this manual first. If despite this manual you still experience
problems during installation or operation of this product, go to our website, www.sweex.com for additional information and look under the
heading service & support. 

Contents of the box

Prior to installation, check if all required parts are present. The following parts must be present in the box: 

Sweex Wireless Broadband Router 140 Nitro XM

Mains supply adapter

CD-ROM with extensive English manual

Manual in 13 different languages

Specifications

Supports: PPTP, PPPoE, Static IP and DHCP Client

Supports: Nitro XM, IEEE 802, IEEE 802.11b

1 x 10Base-T/100Base-TX WAN port (10/100 Mbps)

4 x 10Base-T/100Base-TX LAN ports (10/100 Mbps) 

Maximum connection speed: 140 Mbps

Protection: 64/128-bit WEP, WPA, and 802.1x encryption

Universal Plug and Play

Not operating system dependent

Additional specifications

Firewall

Wireless Distribution System (WDS)

Wireless LAN MAC filtering (ACL)

Supports Dynamic DNS (dydns.org)

DMZ

Port forwarding

Virtual server

LW140_man_inside5.0.qxd  14-10-2005  16:34  Pagina 2

Summary of Contents for LW140









Reviews: