SP220V2/-E/-F
2x2 Dual Band 802.11ac Wave 2 Outdoor Access Point
QSG
5
External 5GHz directional-antennas-23dBi for SP220V2-E
(Optional accessory_ANT-D5G-23)
Align the antenna mount with antenna; screw tightly all four screws.
Unscrew the screws on the two U-bolts,
then attach the pole and align two U-bolts
with plates. Screw the screws tightly.
Attach two 1.5M N-type cables to the reserved
antenna jacks, and connect to the directional
antenna.
Grounding Connection & Protect from Lightning
1.
Make your device GND port connect to ground wire.
2.
The ground wire connects to the earth. In addition, the
grounding wire meets to 6-AWG copper grounding wire.
Spec:
Dual linear,
±
45°, HPBW/Horizontal 10°, HBPW/Vertical
10°, IP65 Waterproof
Note:
Before screw the directional-antenna, please reserve 15
cm between the device and directional-antenna.
Note:
To prevent radio inflection, it is recommended to power
the device on after rotate the directional-antenna.
Note:
Be sure that grounding is available and that it
must comply with local and national electrical codes.
For additional lightning protection, use lightning rods
and lightning arrestors.