Q1. Cannot connect to the Internet?
• If the DSL light is off this means the broadband service may not have been activated on your telephone line.
Make sure the Phone Cable is plugged into the DSL socket on the modem and the other end is plugged into
the wall socket.
Q2. Cannot browse the Internet?
• Check that the modem’s “LAN1” light is on. Check that the “Ethernet” cable is firmly plugged in.
• Perform a PING test. In Windows XP, Vista or Windows 7, click “Start” then “Run”. Type “Command” then click OK.
Type ping “192.168.1.1” then press “Enter”. The response should resemble:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=4ms TTL=30
If there is a similar response, the router is communicating with your computer correctly and the problem lies
elsewhere. If the result is Request timed out, there may be a network problem. Check that the “Ethernet” cable
is firmly plugged in.
• Disable any personal firewall or virus checker temporarily.
• If you are using Internet Explorer, go to “Tools” on the browser menu and select “Internet options” then
“Security” and reset the security level by clicking on the “Default Level” button.
Troubleshooting
Indicator lights
There are 6 indicators on the front panel. (See Figure 3)
Warranty
Dynalink warrants this product against defects in materials and workmanship for a period of twelve months
from the original date of purchase. Dynalink will, at its discretion, repair or replace the faulty unit, free of charge,
provided it is returned to us with proof of purchase from an authorised dealer within the warranty period.
Return delivery after repair will be paid for by Dynalink.
We reserve the right not to repair or replace goods that:
» have been mishandled, abused or not installed according to the guidelines as outlined in the instructions.
» have been subjected to a power surge from other equipment or other external factors.
» have been altered or modified.
Quick Setup Guide
DYX9667R
Ethernet Cable
Phone Cable
DYNALINK Modem/Router
This guide has been designed to help you set up your modem
easily and should only take a few minutes to complete.
VDSL2
Wireless Modem Router
Package Contents
Power Adapter
Function Colour & Status Definition
Power is off
Power is on and the device operates normally
Power on self-test in progress.
The device enters the console mode of the boot loader.
Power on self-test failure if this light remains solid.
Firmware upgrade in progress
No USB signal is detected
Data going through USB port
USB interface is ready
No wireless signal is detected
Data going through WLAN port
WLAN interface is ready
No Ethernet signal is detected
Data going through Ethernet port
Ethernet interface is ready
Modem is not online
Modem is online
No DSL signal is detected
DSL line handshaking in progress
DSL line training in progress
DSL line connected
Off
Flash Green
Solid Green
Off
Flash Green
Solid Green
Off
Flash Green
Solid Green
Red
Solid Green
Off
Slow Flash Green
Fast Flash Green
Solid Green
Off
Solid Green
Solid Red
Flash Red
USB
WLAN
LAN
PPP
DSL
Power
“not recommended
for VDSL”
