Zaxcom Nova Front Panel
7
Multi-Function Keys 1 thru 5
•
A quick press will PFL (pre fader listen) to the input that is assigned to that fader. When PFL is engaged the
key will blink. Additional inputs can be combined by pressing another PFL key. To return to normal
monitoring press the PFL key again.
•
Pressing and holding a key will open the menu for that key
-
F1 - Meta Data Menu
-
This is where Meta Data can be entered and edited.
-
F2 - Cue Menu
-
This is where files can be played back from and Audition and Re-Record can be launched.
-
F3 - Record Enable Menu
-
This is where the Primary and Mirror track are enabled from.
-
F4 - Output Assign Matrix -
This is where the 6 output busses are assigned.
-
F5 - Media Menu -
This is where that parameters for the record cards are set.
Multi -Function Keys F6 thru F11
•
From the meter screen these are shortcut keys.
-
F6
- Headphone selector.
-
F7
- Track Assign Matrix.
-
F8
- Output Assign Matrix.
-
F9
- Receiver Menu
-
F9
- Fader Assign Matrix.
-
F10
- TC Slate.
•
Navigate within a menu. When a key has a function it will be labeled in the menu page.
Color LCD Screen
Daylight-readable color LCD screen.
Faders x 5 with LEDs
•
Adjust the level for that input.
•
When the TRIM key is blinking turning a fader will adjust the trim of the input assigned to that fader.
•
When the ZNET key is blinking turning a fader will remotely adjust the input gain of the transmitter assigned
to that fader.
•
The 15 LEDs around each fader will act as an input meter and will modulate with the audio, the brightest LED
will act as a pointer for the fader, the color LEDs will display the bank that is selected. If multiple inputs are
assigned to a fader there will be 3 point LEDs. When no LEDs are illuminated that indicates that noting is
assigned to that fader.
Primary and Mirror LEDs
These LEDs will illuminate when the primary or mirror card is being read or written to.
Internal Slate Microphone
When internal sale is selected this will be the slate microphone.
Headphone Volume knob
Star key
•
From the any home meter screen, press it to advance to the next meter screen.
•
When in a menu screen, press it to go to the home meter screen.
•
In the output bus routing matrix, head phone setup matrix, and card mix matrix pressing it adds phase
reverse to the cross point options, when inverted cross points are enabled in the ENG Setup menu.
•
If pressed while powering-up, Nova will look for software on the mirror card and start the software update
process.