Nova Operations Tone
42
Setting Up and Engaging Tone
Assigning Tone to output busses
To assign tone to an output bus, press the F4 key to go to the output bus assign
matrix. When in the matrix press the F10 key (DIG/SCT) and select which output bus
will receive tone when tone is engaged by setting a cross point in the “T” row.
Please note that only the busses with tone routed to it will output the slate tone
when the visual time code slate tone is activated.
Assigning tone to card tracks
To assign tone to card tracks, press the TRIM key to go to the track assign matrix.
When in the matrix press the F10 key (DIGITAL)
and select which card tracks will
receive tone when tone is engaged when tone is engaged by setting a cross point in
the “T” row.
Adjusting the tone frequency and level
Tone level and frequency can be adjusted in the ENG setup menu. Please note it is advised to keep the tone level
at -20dB for most operations.
Turning on/off tone
To turn on / off the tone generator - SHIFT (press and hold the MENU key) and then press the TONE / COM key.
