Main Menu ENG Setup Menu
19
GP Remote Roll Enable
This enables a remote roll switch. The GPI will need to be wired to pin 4 on the AES I/O DB15 port Nova.
•
OFF
- Remote roll will not be enabled.
•
POSITIVE
- Remote roll will engage when there is a low to high voltage transition.
•
NEGATIVE
-Remote roll will engage when there is a high to low voltage transition.
Punch-In
ALLOWED
- When Punch-In is allowed a new segment can be created while recording by pressing the REC
key. If the Rec/Stop warning option is enabled there will be an audible beep when a new file is created. The
beep is heard in the headphones only and is not sent to the record tracks or output busses. Please note
regardless of this setting Nova will create a new file when the current file reaches 2GB.
DISABLED
- A new file cannot be created while recording. To create a new segment STOP must be pressed
first.
Tone Frequency Adjust
The frequency of the reference tone can be adjusted here. The tone frequency is adjustable from 20 to
20,000 Hz in 200Hz increments
Tone Level
The level of the reference tone can be adjusted from this menu. The tone level is adjustable between -90 to
0dB in 1 dB increments.
Meter Peak Hold Set
The peak hold sets the duration the peak indicator (the white vertical bar within the meters) is held after the
audio hits the peak. The peak hold range is from 100MS to 4000MS with a step value of 100MS.
Transport Keys
•
PRESS
- The REC and STOP keys will respond with a quick press.
•
HOLD
- The REC and STOP keys will need to be pushed and held to go in to record and stop recording. The
button hold time is set in the advanced menu.
This is to prevent Nova from accidentally going into or out of record.
Inverted Xpoints
•
ON
-The cross points in the track assign, output buss assign and the headphone set up matrix will have
the option to invert the phase for the assignment by pressing the STAR key.
•
OFF -
Pressing the STAR key will not give the option to invert the phase.
Track Name Preset Edit
This is where the preset track names are entered. There are 20 track name presets available. Existing names
can be edited and new track names can be created. To edit a track name scroll the MENU knob to the
desired preset position. Then press the MENU knob to open the on screen keyboard.
