5 Setup and assembly
5.1 Safety instructions for setup and assembly
Depending on the system, the platform or steps can deviate from horizontal to a maxi-
mum of 1.5°.
WARNING
Injury to persons
Failure to observe the instructions in the prior chapters may result in injury.
• Observe the sections “General information” and “Safety instructions” before carrying
out any work.
WARNING
Injury to persons
Improper assembly of the product may result in injury.
• Follow the assembly sequence shown in these instructions.
• Install all parts included in the scope of delivery as instructed.
• At least two persons are required to assemble the equipment. Additional persons
may be required for heavy products.
• Use lifting equipment as required to erect the fully or partially assembled products.
Attach the lifting equipment properly to the body of the access steps or to the plat-
form.
• Only self-locking nuts may be used during installation or maintenance.
WARNING
Injury to persons
Improper assembly of the product may lead to it toppling. This may lead to injuries.
• Always press down the brake lever on the fixed and swivel castors to prevent the
platform from rolling away.
• Set up the product on a level surface.
• Do not climb onto the product when assembling it.
WARNING
Injury to persons
There is a risk of crushing if the product is assembled improperly. This may lead to inju-
ries.
• Always wear personal protective equipment that is appropriate for the job at hand.
• Keep hands and feet clear of the possible danger zones.
13
en
Summary of Contents for 40060041
Page 22: ...A1 4x 4x 4x 1 2 3 3 4 5 A2 6 M8x30 10x Assembly 22...
Page 23: ...B1 4 3 2 2 1 1 A3 6 13 M8x20 4x M8x45 M8x85 4x Use 23...
Page 24: ...B2 5 1 1 2 3 B3 5 1 2 3 1 OPEN CLOSED OPEN CLOSED UP DOWN 4 1 2 2 3 24...
Page 25: ...Repairs C1 5 1 l l x a a 20 mm l x a x l x a x 4 x M8 4 1 2 3 25...
