AUTOMATIC GATE OPENER
• Installation Manual
14
Step 2
(fig. 13a & 13b)
NOTE:
Gate openers (actuators) should be in the
retracted or closed position before attaching the gate
bracket and the post mount bracket assembly.
Attach the gate bracket and the post mount bracket
assembly to the gate openers (actuators) by inserting a
clevis pins through the holes in the gate brackets and
the post pivot brackets and the clevis at each end of the
gate openers (actuators). Secure the clevis pins using
the clevis pin clips.
Figure 11
Method Two
Method One
Thin-walled
tube gate
gate bracket
wood or metal
reinforcement
(not included)
steel pipe cut in half (inside
diameter of pipe should equal
outside diameter of gate)
Thin-walled
tube gate
Clevis pin clip
Post bracket
assembly
3/8” x 1 1/4”
clevis pin
Gate opener (actuator)
Clevis pin clip
Post bracket
assembly
3/8” x 1 1/4”
clevis pin
Gate opener (actuator)
Figure 13a
Figure 13b
Figure 12
3/8” lock washer
Post brackets
3/8” x 2” bolt
3/8” nut
3/8” washer
Pivot Bracket
