13
6.
MAINTENANCE AND SERVICE
6.1
General notice
*
The quality of this tool is protected by manufacturer limited one
year warranty with exception of 3 years warranty on brushless
motor and ECU
.
Please refer to conditions on warranty proof. To protect
your warranty rights, please make sure your dealer had completely filled out
your warranty proof and signed on it.
The warranty excludes all wearing
parts and battery charger.
Please refer to “Wearing parts list” in article 7
“CHANGING WEARING PARTS”.
*
When tool is damaged, please call your dealer for further instruction and send
your tool to manufacturer’s authorized dealer for repair service.
Do not
attempt to repair it by yourself
.
This may invalidate the warranty.
*
Please use enclosed cleaning brush to clean strap slot including strap gripper,
sealing head and bottom sealing gripper. Regularly cleaning will assure
efficient working and decrease malfunction possibilities. You may also clean
the residues on strap slot with air gun.
*
Clean your tool exterior with only slightly damp cloth. Never use any
chemical, gasoline, thinner, turpentine, dry cleaning fluids or liquids which
may damage the plastic housing or finishing. Never let any liquid get into the
tool and never immerse into any liquid.
WARNING
Keep the tool away from magnetic fields, liquid, fumes, and small metal
objects including but not limited to metal debris, particles etc. within
operating surroundings. Fail to follow this instruction may cause
inhalation or ingress of foreign objects into motor and/or electronic control
unit (ECU) and causes damages and malfunctions to the tool and invalidate
warranty.
6.2 Dust cover:
Keep the filter of the dust cover clean and ventilation at all time.
Replace
immediately if the filter is broken
to avoid any possible tool damage.
Dust cover can be washed in water and air dried.
DO NOT USE ANY
CHEMICAL
CLEANER
. See figure11&12 for disassemble & assemble.
Take off screw (M3*0.5*10 mm) as figure11 shown, lift the dust cover from
