6
Maintenance & Service
* Good maintenance and keeping the tool clean can ensure a normal operation and a
good performance of the tool. Use genuine spare parts or accessories according to
this user manual for replacement. Using non-genuine spare parts for replacement
may result in considerable danger. If any damage occurred, please send it to
manufacturer’s authorized dealer for repairing.
Do not try to repair the tool by yourself, it will invalid your warranty.
* Check damaged parts. Before further use of the tool, part which is damaged should
be carefully checked to determine that it would operate properly and perform its
intended function. Check for alignment of moving parts, free running of moving parts,
breakage of parts, mounting and any other conditions that may affect its operation.
Do not operate tool with broken or worn parts. Never modify the tool.
*
Please remove battery from the tool before maintenance.
* Please refer to
articles 6 “ MAINTENANCE AND SERVICE”
for detailed
information.
* When the tool is damaged, please do not operate it again. Do not modify the tool
either.
Storage
* Store the tool and battery separately in a dry and clean location when not in use.
Keep away from reach of children.
4
SETTING BEFORE OPERATION
Read and follow the safety instructions of this manual. Please follow the
steps as follows before initial operation
4.1
Introduction of operating components
Please refer to 1.1 “ Description of major components. “
FIGURE 2.
ZP-SW25
Description of major components
Handle
Battery Release Button
Operation Lever
Sealing time adjustment knob
Sealing Lever
Level