7
4.2 Operation indicator
The operation indicator can instantly tells you the operation status of the tool.
Operation status
Indicator light status
Remark
Load Battery
OFF
Remove battery if tool is not
in operation for a long period
of time. Removing Battery
can avoid unexpected
accident.
Lift up the
operation lever
Green light on ( when sealing is
started)
Turn the sealing
lever to start
sealing
Green light flashing (cooling)
Green light on (operation done)
A Beeping noise comes upon
the finish of cooling.
Tool is not in
operation over 10
minutes
OFF
A power saving mode
Battery needs to be
re-charged
Red light flashing
●●●●●●●●●
(continued)
Continuous beeping noise
Device Error
Stop every 2 flashes
●●
___
●●
___
●●
( continued)
1.3 sec 1.3 sec.
No beeping noise
Motor is jammed.
Please contact your Zapak
dealer for inspection.
Stop every 3 flashes
●●●
___
●●●
___
(continued)
1.3 sec. 1.3 sec.
No beeping noise
Motor temperature is too high
Please wait until motor’s
cooled down
Stop every 4 flashes
●●●●
___
●●●●
(continued)
1.3 sec.
No beeping noise
Other motor malfunction
Please contact your Zapak
dealer for inspection.
4.3
Charging battery
Refer to FIGURE 3 to insert the battery into charger (Please refer and follow the safety
instruction and operation of the battery and charger user manual.)
I.
Usage Notice:
* Each BOSCH Li-Ion battery (No. 9380) is equipped with Charge Level Indicator.
Press button to check the status of charge level condition (capacity), as shown on
Figure 3 (*For safety reasons, it is only possible to check the charge condition when
the tool is at a standstill.)
* When you receive BOSCH Li-Ion battery, its capacity may not be sufficient. Please
check capacity status and charge fully before use when necessary.
* When three LEDs light up, the capacity is sufficient, no need to charge.
* When only one LED lights up or flashing green, or the Tool’s “Operation Indicator” in
flashing red, proceed charging with BOSCH charger (No. 2382-XX).
* Adaptor is NOT required for charging BOSCH Li-Ion battery (No. 9380)
* Remove battery from charger upon charging process is completed. Otherwise, it may
shorten battery’s service life due to over-charging.
