DAILY USE - DRYING ONLY
WARNING! Refer to Safety chapters.
This appliance is an automatic washer
dryer.
PREPARATION TO DRYING
1. Press the On/Off button for some seconds to
activate the appliance.
2. Load the laundry one item at a time.
3. Turn the programme dial to the programme
suitable for the items to dry. The appliance
defaults to the washing only mode and the
indicator of the Mode - Wash button is on.
4. Tap on the Mode - Dry button and then on the
Mode - Wash button to perform drying only.
The indicator of Mode - Dry button illuminates
and the indicator of Mode - Wash button goes
off. The indicators
and appear on the
display and the indicator
disappears.
When drying a big amount of laundry,
to have good drying performances,
make sure that the laundry itself is not
rolled up and that is uniformly
distributed in the drum.
DRYING - AUTOMATIC LEVELS
1. Tap on the Auto Dry button repeatedly until the
display shows the required dryness level. The
indicators in the display illuminate accordingly:
a.
Iron dry: for cotton items;
b.
Cupboard dry: for cotton and
synthetic items;
c.
Extra dry: for cotton items.
The display shows the drying programme
duration.
2. Touch the Start/Pause
button to start the
programme.
In the display the door locked
indicator comes
on.
The display also shows the remaining programme
time.
TIMED DRYING
1. Tap on the Time Dry button repeatedly to set
the desired time value (see the "Timed drying"
table the "Programmes" chapter). The drying
level indicator goes off and the indicator
comes on.
Each time you tap on this button the time value
increases by 5 minutes. The display shows the set
new time value.
2. Touch the Start/Pause
to start the
programme.
In the display the door locked
indicator comes
on.
The display also shows the remaining programme
time.
AT THE END OF THE DRYING PROGRAMME
• The appliance stops automatically.
• The acoustic signals operate (if they are active).
• In the display
comes on.
• The indicator of the Start/Pause button
goes off. The door locked
goes off.
The appliance continues to operate with the
anti-crease phase for approximately 30 minutes
or more if Anti-crease option was set.
The anti-crease phase reduces creasing.
You can remove the laundry before the anti-
crease phase is completed. We recommend, for
better results, that you remove the laundry when
the phase is almost completed or completed.
The indicator
remains lit.
• Press the On/Off button for some seconds to
deactivate the appliance.
After some minutes from the end of
the programme, the energy saving
function deactivates the appliance
automatically.
1. Remove the laundry from the appliance.
2. Make sure that the drum is empty.
After drying phase, clean the drum, the
seal and the inside of the door with a
wet cloth.
27
